Freeze Dry Machine

One of the oldest methods of food preservation in the world is to store food by drying it. This method is based on the logic of increasing the shelf life of the products collected in the season by treating them with a certain heat. This method, which has been used by our mothers and grandmothers in their kitchens for centuries, is now combined with the power of developing technology. The technology, which shows itself in every field, also provides industrial practicality and convenience by providing drying of food.
The purpose of drying processes is to increase the shelf life of foods naturally by evaporating the water in them. In this way, while healthier foods are obtained, it is aimed to consume the foods in the healthiest way out of season. While traditional methods of drying food are more troublesome in terms of both time and comfort, you can dry the food you want faster and more comfortably with Freeze Dry technology.
In this sense, the drying machines in the site equipped with Freeze Dry technology are more advantageous than the drying methods you know. While traditional drying methods at home are grueling, Freeze Dry gives you the opportunity to dry much more food in a short time. Moreover, while traditional drying methods at home save you time, you can provide a much faster drying with Liyo Life dryers.

Freeze Dry

The Freeze Dryer method is perfect for healthy snacks that do not lose their naturalness by utilizing new generation food processing technologies. By preventing loss of nutritional value in foods, shelf life is extended and new usage areas are created. Freeze Dry is known as lyophilization or freeze drying. Freeze dry machines, which are an essential part of healthy life today, are a technology developed in the early 1900s. It has also contributed to many different sectors.
Offering important solutions to the food industry, Freeze Dry has influenced food technology because it is healthy. It can also be used for many foods consumed in daily life. It can be used in all areas from instant coffees or milk powders used to sweeten coffee, cereals used for breakfast to medical products.

Freeze Dry Lyophilizer Machines

Before moving on to Freeze Dry Machines and their features, let’s briefly explain what freeze-dry is.
The Freeze Dry method, in the most straightforward summary, is the freeze-drying method. The Freeze Dry machine first freezes and then dries the products. So why does the freezing process take place first and then the drying process?

Thanks to this method, the moisture in the food is not lost.
The shape of the frozen product remains the same.
Products dried using Freeze Dry technology do not lose their nutritional value. There is almost no difference between the products in their fresh state. Because the ingredients in these foods are protected by 97%. Since the protein and vitamins in the products are preserved, very healthy foods are prepared.

There are many types of Freeze Dry machines. These machines, which have different features, vary according to many features such as operating temperature, ice holding capacity, total tray area length, and remote access. You can examine the products with these different features and choose whichever product is suitable for you.

Freeze Dry Machine Usage

Freeze Dry Machines, which have an innovative technology and are therefore used in many different sectors, especially in the food sector, have very simple usage instructions. The products are first processed through certain processes and frozen. Frozen products are dried in the next step. Basically, three steps come to the fore in the use of such machines. These can be summarized as follows:

In the first stage, the product is frozen. There are various pre-preparation processes for the product. After these processes, the product is frozen and goes into crystal form.
The next stage is the sublimation process. It can also be defined as primary drying. Sublimation processes are performed on the frozen product. The necessary energy is created for this. The water content in the product is reduced by 90-95%.
The last stage is the Secondary Drying stage. The water that cannot be removed in the primary drying process is removed at this stage.

Being meticulous in the use of the machine will also increase the success rate of the operations. After the drying process, which is carried out quite easily, the water content of the products is reduced. In this way, it becomes possible to keep the products intact for a much longer period of time.

Advantages of Freeze Dry Machine

Freeze Dry, with its high technological features, practically supports the drying processes. These types of machines, which have an innovative design and act with the basic working principle, are used in areas such as the food industry, the chemical industry, and the pharmaceutical industry. The drying method used in Freeze Dry machines is a technique that has been known and used for a long time. Therefore, it has a long history.
Freeze Dry machines are very special machines that have many advantages. The water in the products is largely reduced to a minimum by freezing and then drying processes. In addition, the product remains in its fresh form. 
Therefore, there is no reduction in size. But it can be stored much more comfortably. Another advantage of Freeze Dry machines is that the products have no water to allow bacteria to live. Thus, products that can be stored for a long time can remain intact and can be used without any problems.

Freeze Dry Machine Price

Freeze Dry machine price varies depending on many factors. The Freeze Dry machine is a state-of-the-art freeze dryer designed to suit customers’ applications. In the freeze-drying method, a degree of scalability is achieved with a unique control. In this way, customers are provided with flexibility over the years. 
The Freeze Dry machine is perfect for various institutions and applications with its small or large size and high capacity. It can be used in healthcare and medical fields while providing new generation freeze dryer solutions for the food industry.
For Freeze Dry machine price information, you can get information from the contact numbers on our website.

Showing all 11 results

  • FD5CT

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 5 kg
    Wet Product Loading (kg/lot) 3,5 / 4
    Machine Dimensions (w*d*h)(mm) (**) 631*728*850
    Machine Settlement Area (m2) (**) 0,5
    Machine Platform Area (m2) (*)
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place Within itself or in -40 chamber
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 5
    Rack Dimensions (mm) 235×540
    Rack Clearance (mm) 44
    Liquid Used in Heating Racks Electrical Heater
    Number of Product Trays 5
    Tray Dimensions (mm) 480*227
    Tray Depth (mm) 0,5
    Total Tray Area m2 20
    Number of Product Loading Cars None
    Rail System No
    IQF (Individual Quick Freezing) None
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 30 <
    Defrost System Automatic
    Power Consumption (kWh) 0,9
    Circle Dimension (m) 0,38
    Software unique electronic card
    Compressor Embraco
    Vacuum Pump Baosi
    Blower None
    Remote Tracking System None
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks Aluminum
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD10CT

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 10 kg
    Wet Product Loading (kg/lot) 7 / 8
    Machine Dimensions (w*d*h)(mm) (**) 854x1335x1596
    Machine Settlement Area (m2) (**) 1
    Machine Platform Area (m2) (*)
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place Within itself or in -40 chamber
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 5
    Rack Dimensions (mm) 235×1125
    Rack Clearance (mm) 44
    Liquid Used in Heating Racks Electrical Heater
    Number of Product Trays 10
    Tray Dimensions (mm) 480*227
    Tray Depth (mm) 1,1
    Total Tray Area m2 20
    Number of Product Loading Cars None
    Rail System No
    IQF (Individual Quick Freezing) None
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 30 <
    Defrost System Automatic
    Power Consumption (kWh) 1
    Circle Dimension (m) 0,38
    Software unique electronic card
    Compressor Embraco
    Vacuum Pump Baosi
    Blower None
    Remote Tracking System None
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks Aluminum
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD1400

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 1400 kg
    Wet Product Loading (kg/lot) 750 / 1325
    Machine Dimensions (w*d*h)(mm) (**) 3749x7057x2856
    Machine Settlement Area (m2) (**) 26
    Machine Platform Area (m2) (*) 52
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Radiation
    Rack Temperature (Centigrade) max 120
    Product Cooling Place -40 Cooling Room
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 32
    Rack Dimensions (mm) 650×5400
    Rack Clearance (mm) 75
    Liquid Used in Heating Racks Glycol
    Number of Product Trays 225
    Tray Dimensions (mm) 600 x 750
    Tray Depth (mm) 100
    Total Tray Area m2 40
    Number of Product Loading Cars 8
    Rail System Yes
    IQF (Individual Quick Freezing) Optional
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 13 <
    Defrost System Hot Water
    Power Consumption (kWh) 121
    Circle Dimension (m) 2,5
    Software PLC
    Compressor Bitzer or Dorin
    Vacuum Pump Pfeiffer
    Blower Available
    Remote Tracking System Optional
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks AISI 304

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD180

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 180 kg
    Wet Product Loading (kg/lot) 110 / 150
    Machine Dimensions (w*d*h)(mm) (**) 2050x2200x2162
    Machine Settlement Area (m2) (**) 4,5
    Machine Platform Area (m2) (*) 9
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place -40 Cooling Room
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 17
    Rack Dimensions (mm) 774×1300
    Rack Clearance (mm) 40
    Liquid Used in Heating Racks Glycol + Pure Water
    Number of Product Trays 51
    Tray Dimensions (mm) 418×728
    Tray Depth (mm) 16
    Total Tray Area m2 30
    Number of Product Loading Cars 2
    Rail System No
    IQF (Individual Quick Freezing) Optional
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 13 <
    Defrost System Hot Water
    Power Consumption (kWh) 14
    Circle Dimension (m) 1,5
    Software PLC
    Compressor Bitzer or Dorin
    Vacuum Pump Pfeiffer
    Blower None
    Remote Tracking System Optional
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks AISI 304
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD1800

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 18400 kg
    Wet Product Loading (kg/lot) 1000 / 1750
    Machine Dimensions (w*d*h)(mm) (**) 3749x10057x2856
    Machine Settlement Area (m2) (**) 37
    Machine Platform Area (m2) (*) 74
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Radiation
    Rack Temperature (Centigrade) max 120
    Product Cooling Place -40 Cooling Room
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 32
    Rack Dimensions (mm) 650×8000
    Rack Clearance (mm) 75
    Liquid Used in Heating Racks Glycol
    Number of Product Trays 300
    Tray Dimensions (mm) 600 x 750
    Tray Depth (mm) 135
    Total Tray Area m2 40
    Number of Product Loading Cars 10
    Rail System Yes
    IQF (Individual Quick Freezing) Optional
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 13 <
    Defrost System Hot Water
    Power Consumption (kWh) 160
    Circle Dimension (m) 2,5
    Software PLC
    Compressor Bitzer or Dorin
    Vacuum Pump Pfeiffer
    Blower Available
    Remote Tracking System Optional
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks AISI 304

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD20CT

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 20 kg
    Wet Product Loading (kg/lot) 14 / 16
    Machine Dimensions (w*d*h)(mm) (**) 854x1335x1996
    Machine Settlement Area (m2) (**) 1
    Machine Platform Area (m2) (*)
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place Within itself or in -40 chamber
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 10
    Rack Dimensions (mm) 235×1125
    Rack Clearance (mm) 44
    Liquid Used in Heating Racks Electrical Heater
    Number of Product Trays 20
    Tray Dimensions (mm) 480*227
    Tray Depth (mm) 2,1
    Total Tray Area m2 20
    Number of Product Loading Cars No
    Rail System None
    IQF (Individual Quick Freezing) No
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 30 <
    Defrost System Automatic
    Power Consumption (kWh) 2
    Circle Dimension (m) 0,38
    Software unique electronic card
    Compressor Embraco
    Vacuum Pump Baosi
    Blower None
    Remote Tracking System None
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks Aluminum
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD35

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 35 kg
    Wet Product Loading (kg/lot) 20 / 25
    Machine Dimensions (w*d*h)(mm) (**) 1410x1288x1654
    Machine Settlement Area (m2) (**) 1,8
    Machine Platform Area (m2) (*)
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place Within itself or in -40 chamber
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 11
    Rack Dimensions (mm) 378×950
    Rack Clearance (mm) 38
    Liquid Used in Heating Racks Electrical Heater
    Number of Product Trays 11
    Tray Dimensions (mm) 355×936
    Tray Depth (mm) 3,7
    Total Tray Area m2 20
    Number of Product Loading Cars No
    Rail System None
    IQF (Individual Quick Freezing) No
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 30 <
    Defrost System Automatic
    Power Consumption (kWh) 4
    Circle Dimension (m) 0,65
    Software Unique electronic card
    Compressor Embraco
    Vacuum Pump Baosi
    Blower None
    Remote Tracking System None
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks Aluminum
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD450

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 450 kg
    Wet Product Loading (kg/lot) 325 / 450
    Machine Dimensions (w*d*h)(mm) (**) 3149x3215x2278
    Machine Settlement Area (m2) (**) 10
    Machine Platform Area (m2) (*) 20
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place -40 Cooling Room
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 19
    Rack Dimensions (mm) 1270×2140
    Rack Clearance (mm) 37
    Liquid Used in Heating Racks Glycol + Pure Water
    Number of Product Trays 54
    Tray Dimensions (mm) 702×1220
    Tray Depth (mm) 46
    Total Tray Area m2 30
    Number of Product Loading Cars 2
    Rail System No
    IQF (Individual Quick Freezing) Optional
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 13 <
    Defrost System Hot Water
    Power Consumption (kWh) 41
    Circle Dimension (m) 2
    Software PLC
    Compressor Bitzer or Dorin
    Vacuum Pump Pfeiffer
    Blower Available
    Remote Tracking System Optional
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks AISI 304

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD80

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 80 kg
    Wet Product Loading (kg/lot) 52 / 62
    Machine Dimensions (w*d*h)(mm) (**) 2160x1288x2404
    Machine Settlement Area (m2) (**) 2,8
    Machine Platform Area (m2) (*)
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Convection
    Rack Temperature (Centigrade) max 70
    Product Cooling Place Within itself or in -40 chamber
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 22
    Rack Dimensions (mm) 756×950
    Rack Clearance (mm) 38
    Liquid Used in Heating Racks Electrical Heater
    Number of Product Trays 22
    Tray Dimensions (mm) 355×936
    Tray Depth (mm) 7,5
    Total Tray Area m2 20
    Number of Product Loading Cars No
    Rail System None
    IQF (Individual Quick Freezing) No
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 30 <
    Defrost System Automatic
    Power Consumption (kWh) 7
    Circle Dimension (m) 1,2
    Software Unique electronic card
    Compressor Embraco
    Vacuum Pump Baosi
    Blower None
    Remote Tracking System None
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks Aluminum
       
       

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD900

    Technical Features
    Introduction PDF
    Ice Capacity (kg/lot) 900 kg
    Wet Product Loading (kg/lot) 500 / 875
    Machine Dimensions (w*d*h)(mm) (**) 3749x5557x2856
    Machine Settlement Area (m2) (**) 20
    Machine Platform Area (m2) (*) 40
    Ice Condenser Temperature (Centigrade) -45
    Heat Conduction Radiation
    Rack Temperature (Centigrade) max 120
    Product Cooling Place -40 Cooling Room
    Product Cooling Temperature (Centigrade) -32
    Number of Racks 32
    Rack Dimensions (mm) 650×4000
    Rack Clearance (mm) 75
    Liquid Used in Heating Racks Glycol + Pure Water
    Number of Product Trays 150
    Tray Dimensions (mm) 600 x 750
    Tray Depth (mm) 67,5
    Total Tray Area m2 40
    Number of Product Loading Cars 5
    Rail System Yes
    IQF (Individual Quick Freezing) Optional
    Refrigerant R404A
    Cooling Method Gas
    Final Vacuum Level (Pa) 13 <
    Defrost System Hot Water
    Power Consumption (kWh) 80
    Circle Dimension (m) 2,5
    Software PLC
    Compressor Bitzer or Dorin
    Vacuum Pump Pfeiffer
    Blower Available
    Remote Tracking System Optional
    Chamber AISI 304
    Tray Material AISI 304
    Material of Heating Racks AISI 304

    (*) As a recommendaton, the recommended area may vary depending on the number of machines and layout.

    (**) Represents only the seatng area of the machine. The cover sweeping area and the spaces between the machine and other devices are not included.

  • FD150

    Teknik Özellikler
    Width (mm) 2000
    Depth (mm) 3960
    Height (mm) 2115
    Ice Holding Capacity (kg) 150
    Loading Volume (kg) 100
    Interior Body Material AISI 304
    Operating Temperature -40°C / +65°C
    Number of shelves (trays) 39
    Shelf (tray) Material AISI304
    Shelf (tray) Size 418×728 mm
    Total Tray Area (m2) 12
    Heating Plates 6000 Series Aluminum
    Room Dimensions 1500×1500 mm (Excluding Covers)
    Heating and Cooling Systems are Compact
    Control System 10.1 inch 1024×600 Touch LCD Screen
    Remote Access Wi-Fi and internet support/Remote control
    and monitoring system
    Sensor Type Modbus-compatible sensor measurement
    and output control mechanism
    Graphics Can Be Archieved/Graphically Viewed
    Battery Support Yes
    Refrigerant R404a
    Energy Consumption (kwh/24h)